XY is used to match lighting between different manufacturers, as we all do our best to accurately calibrate our lights to match different XY values. You can see a visual representation in the Sidus Link App. Each coordinate corresponds to a different color on the chart. XY: XY is a standard for color mixing lighting fixtures that allows you to match a coordinate on the CIE 1931 color chart. This is for users who know exactly what ratio they want to mix their colors in. RGB: The RGB mode allows you to individually control the output of the Red, Green, and Blue LEDs independently. Changing the Saturation will control how deep or dull a color is. Changing the Hue will change the target saturated color based on Hue Angle, like on a color wheel. It stands for Hue, Saturation, and Intensity. Valid options are gradual, jump, or strobe.HSI: This is a standard color mode that most people who use color mixing lights should be familiar with. List of RGB colors to transition between in your effect. The entity_id of the LED light to set the effect on. The integration offers a custom service to enable you to set the lights to a custom light effect. Strobes the color indicated by the effect name.Ĭhooses a random color by selecting random values for R, G, and B.Ĭustom Effects - Service flux_led.set_custom_effect Red_strobe, green_strobe, blue_strobe, yellow_strobe, cyan_strobe, purple_strobe, white_strobe Red_fade, green_fade, blue_fade, yellow_fade, cyan_fade, purple_fade, white_fadeįades between the color as indicated in the effect name and black. Jumps through seven different rainbow colors. Smoothly transitions through the rainbow. These can be selected from the front-end, or sent in the effect field of the light.turn_on command. The Magic Home light offers a number of effects which are not included in other lighting packages. If a strip controller device will not stay on wifi or goes offline during adjusting colors and effects, upgrading to a power supply with a higher amperage usually resolves any stability issues. The following models are confirmed to be unsupported. The following models have not been tested but may work. This determines the transition between each color. The effect speed can be adjusted using the slider underneath. These settings can be accessed by navigating to the integration settings in Settings -> Integrations and selecting the “Magic Home” configuration for the bulb or controller.Ī list of RGB colors can be entered to create an effect. If there wasn’t any discovered automatically, don’t worry! You can set up aįrom the configuration menu select: Devices & Services.įrom the list, search and select “Magic Home”.įollow the instruction on screen to complete the set up.Īfter the devices have been added they can be configured with different effects listed below. It will be shown as “Discovered”, which you can select to set it up right Magic Home can be auto-discovered by Home Assistant. These devices have been sold under at least the following brands:Īdding Magic Home to your Home Assistant instance can be done via the user This integration will provide local control over your LED lights/strips and can be configured to auto-scan your network for controllers or for you to manually configure individual lights by their IP address.Įxamples of addressable controllers with strip: WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app. Chances are high that your bulb or controller (eg. The Magic Home integration supports several brands of switches, bulbs, and controllers that use the same protocol.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |